Belleville Washers

When your compression spring application requires a high load in a small space, Lee Spring’s Belleville Washers can be the solution. Their conical configuration enables them to support high loads with relatively small deflections and solid heights compared to helical springs. Learn more about Belleville Washers.

Engineering Notes & Tolerances

Material Information

Spring Coatings and Surface Treatments

Results 536 Springs

Display Per Page 2050100

Part Number	Outside Diameter (cm)	Outside Diameter (in)	Outside Diameter (mm)	Inside Diameter (cm)	Inside Diameter (in)	Inside Diameter (mm)	Thickness (cm)	Thickness (in)	Thickness (mm)	Calculated Load at Flat (gm)	Calculated Load at Flat (kg)	Calculated Load at Flat (lb)	Calculated Load at Flat (N)	Free Height (cm)	Free Height (in)	Free Height (mm)	Bolt Size	Bolt Size	Material	Compare

Results 536 Springs

Display Per Page 20 50 100

Part Number	Outside Diameter (cm)	Outside Diameter (in) Ordenar descendente	Outside Diameter (mm)	Inside Diameter (cm)	Inside Diameter (in)	Inside Diameter (mm)	Thickness (cm)	Thickness (in)	Thickness (mm)	Calculated Load at Flat (gm)	Calculated Load at Flat (kg)	Calculated Load at Flat (lb)	Calculated Load at Flat (N)	Free Height (cm)	Free Height (in)	Free Height (mm)	Bolt Size	Bolt Size	Material
093-006-188	0.478	0.188	4.78	0.236	0.093	2.36	0.015	0.006	0.15	4461.6	4.5	9.8	43.8	0.038	0.015	0.38	3/32	M2.2	SS
093-007-188	0.478	0.188	4.78	0.236	0.093	2.36	0.018	0.007	0.18	5510.3	5.5	12.1	54	0.036	0.014	0.36	3/32	M2.2	SS
093-009-188	0.478	0.188	4.78	0.236	0.093	2.36	0.023	0.009	0.23	8365.7	8.4	18.4	82	0.036	0.014	0.36	3/32	M2.2	SS
093-010-188	0.478	0.188	4.78	0.236	0.093	2.36	0.025	0.01	0.25	11475.2	11.5	25.3	112.5	0.038	0.015	0.38	3/32	M2.2	SS
093-005-188	0.478	0.188	4.78	0.236	0.093	2.36	0.013	0.005	0.13	2581.9	2.6	5.7	25.3	0.036	0.014	0.36	3/32	M2.2	SS
M00320-0030-00600-C	0.6	0.236	6	0.32	0.126	3.2	0.03	0.0118	0.3	15710	15.7	34.6	154	0.045	0.0177	0.45	1/8	M3	51CrV4
125-012-236	0.599	0.236	5.99	0.318	0.125	3.18	0.03	0.012	0.3	15739.9	15.7	34.7	154.4	0.046	0.018	0.46	1/8	M3	SS
125-013-250	0.635	0.25	6.35	0.318	0.125	3.18	0.033	0.013	0.33	20077.2	20.1	44.3	196.9	0.051	0.02	0.51	1/8	M3	SS
125-008-250	0.635	0.25	6.35	0.318	0.125	3.18	0.02	0.008	0.2	5347.5	5.3	11.8	52.4	0.041	0.016	0.41	1/8	M3	SS
138-013-281	0.714	0.281	7.14	0.351	0.138	3.51	0.033	0.013	0.33	17986.6	18	39.7	176.4	0.053	0.021	0.53	#6	M3.5	SS
138-012-281	0.714	0.281	7.14	0.351	0.138	3.51	0.03	0.012	0.3	12378.7	12.4	27.3	121.4	0.048	0.019	0.48	#6	M3.5	SS
138-010-281	0.714	0.281	7.14	0.351	0.138	3.51	0.025	0.01	0.25	10233.7	10.2	22.6	100.4	0.051	0.02	0.51	#6	M3.5	SS
138-015-281	0.714	0.281	7.14	0.351	0.138	3.51	0.038	0.015	0.38	27630.6	27.6	60.9	271	0.058	0.023	0.58	#6	M3.5	SS
148-009-281	0.714	0.281	7.14	0.376	0.148	3.76	0.023	0.009	0.23	6220.7	6.2	13.7	61	0.043	0.017	0.43	#6	M3.5	SS
148-011-281	0.714	0.281	7.14	0.376	0.148	3.76	0.028	0.011	0.28	8518.2	8.5	18.8	83.5	0.043	0.017	0.43	#6	M3.5	SS
148-013-281	0.714	0.281	7.14	0.376	0.148	3.76	0.033	0.013	0.33	14060.7	14.1	31	137.9	0.048	0.019	0.48	#6	M3.5	SS
148-015-281	0.714	0.281	7.14	0.376	0.148	3.76	0.038	0.015	0.38	32399.3	32.4	71.4	317.7	0.061	0.024	0.61	#6	M3.5	SS
156-017-312	0.792	0.312	7.92	0.396	0.156	3.96	0.043	0.017	0.43	32207	32.2	71	315.8	0.064	0.025	0.64	5/32	M3.5	SS
156-015-312	0.792	0.312	7.92	0.396	0.156	3.96	0.038	0.015	0.38	22631.5	22.6	49.9	221.9	0.058	0.023	0.58	5/32	M3.5	SS
156-010-312	0.792	0.312	7.92	0.396	0.156	3.96	0.025	0.01	0.25	8382.1	8.4	18.5	82.2	0.051	0.02	0.51	5/32	M3.5	SS